Listening to Motor Sound During Flight | Microphone for FPV Quadcopter

Listening to Motor Sound During Flight | Microphone for FPV Quadcopter

Some FPV pilots choose listening to motor noise throughout flight as a result of it makes them really feel extra linked to the FPV drone. In this tutorial I’ll clarify the alternative ways of getting audio for FPV flights, and focus on different advantages of getting a mic on the quad.

FPV flying shouldn’t be restricted to what you see, listening is a large a part of the expertise. What you hear would possibly truly show you how to fly higher!

The noise that motors make adjustments with RPM, having the ability to hear it throughout flight makes you’re feeling extra linked to the plane. This is particularly helpful if you find yourself flying with different individuals by listening to the motors from headphone, so you don’t get confused with noise from different quads round you.

Also, whenever you fly too far out, you received’t have the ability to hear your quad, generally it makes me extra nervous. With audio, you’ll nonetheless have the ability to hear it. You may even hear the buzzer when voltage is low regardless how far it’s!

I can’t converse for everybody, however I do really feel extra assured after I can hear the motors spinning.


Some individuals completely hate it!

The high quality of the audio is dependent upon your sign power. On a very good flight it’s like listening to your motors singing to you, however whenever you get interference, the speaker will shout at you with tremendous loud electrical noise.

Anyway, give it a try to see should you prefer it.

There are 3 methods to get FPV audio out of your quad:

  • Using a VTX with Built-in Microphone
  • Using an FPV digicam with Built-in Mic
  • An exterior microphone

Here is a few sound high quality comparability between a VTX built-in MIC, and the External MIC, in addition to a GoPro. It was barely much less noisy after I was flying and listening to it stay, for some cause the audio get noisier when it was recorded in DVR.

The benefit of VTX with built-in Mic is that you simply don’t want to fret about wiring in any respect, it’s plug and play! Examples together with the Holybro Atlatl HV, and the Eachine Nano VTX V2.

I compiled specs of all VTX in the marketplace in this spreadsheet, simply filter down the class “Built-in Mic”

Quite just a few FPV cameras have built-in microphone, such because the Runcam Swift 2.

The wiring is comparatively easy, simply join the Audio output from the digicam to the audio enter in your VTX. Note that not all VTX has audio enter pin, in order that’s one thing to watch out for when shopping for new VTX.

If neither of your VTX or digicam has built-in microphone, you should utilize an exterior mic. It must be powered, and the audio sign goes to the audio enter of your VTX. Some VTX might need two audio inputs (left and proper channels), I like to recommend connecting to each channels should you solely use one mic.

This is the most cost effective one (simply over $1 every):


Although it requires further wiring, the audio high quality is definitely barely higher than these low cost built-in mic on VTX and FPV cameras.

Unfortunately, this mic solely takes 12V for energy, and also you don’t all the time have that accessible in your drone. In that case try the following choice.


This mic from RushFPV is constructed on a tiny PCB, with solder pads for straightforward soldering.

Get it from right here:

It could be powered from 5V which is useful in case your VTX has 5V output.

Your FPV Goggles should have audio output. For instance on the Fatshark HDO2 and Skyzone SKY04X, there’s a 3.5mm headphone jack you possibly can plug in your earbud. But goggles just like the Cobra X doesn’t have audio output, in order that’s one thing to watch out for when shopping for goggles.


This is the TBS Steele earbud, it’s a single channel headphone (just one earbud) and is designed for FPV.

in case you are utilizing FPV displays, they could have built-in speaker and play audio from the video receiver out of the field.

If you assume the noise is just too loud, and there isn’t a quantity management on the earbud, you possibly can attempt including a resistor to the audio sign (e.g. 220ohm – 330ohm).

When you might be flying quick you will get lots of wind noise. If you discover it too noisy, you possibly can attempt partly protecting the microphone with foam, or transfer the mic away from airflow.

Edit History

  • Mar 2016 – article created
  • Sep 2018 – article rewritten
  • May 2021 – revisited article, added RushFPV mic